Sony RDR-HX900 Operating Instructions Manual page 45

HDD
1 2 3
4 5 6
7 8 9
CLEAR
0
[TIMER]
1
Press HDD or DVD.
If you select DVD, insert a recordable DVD.
2
Press [TIMER].
Timer - VIDEO Plus+
Set the timer by entering the timer code.
PlusCode No.
Standard
• If the Timer programming (Standard) menu
appears, press < to switch the display to
"ShowView."
3
Press the number buttons to enter the
ShowView number, and press SET.
• If you make a mistake, press CLEAR and re-
enter the correct number.
4
Select "OK," and press ENTER.
The date, start and stop times, programme
position, recording mode, etc. setting
(page 43) appear.
Timer - VIDEO Plus+
Is the following timer setting correct? To modify,
adjust each item or re-enter the timer code.
Date Start Stop Prog.
Mon 28.6 10 : 00 11 : 30 AAB
PDC/VPS: On
DVD
Number
buttons, SET
</M/m/,,
ENTER
x REC
STOP
OK
Cancel
OK
Cancel
Media Mode
DVD SP Details
Change
Update: --
• If you want to change the setting, press </
, to select the item and press M/m to
change the setting. For the PDC/VPS or
Update functions, select "Details" and
change the settings (page 43).
To re-enter the ShowView number, select
"Change."
5
Select "OK," and press ENTER.
The TIMER REC indicator lights up on the
front panel, and the recorder is ready to start
recording.
To stop recording during timer recording
Open the remote's cover and press x REC STOP.
Note that it may take a few seconds for the
recorder to stop recording.
If the timer settings overlap
See page 44.
To extend the recording duration time while
recording
See page 44.
To confirm, change, or cancel timer recording
See "Checking/Changing/Cancelling Timer
Settings (Timer List)" (page 46).
z Hint
The Rec Mode Adjust function also works with this timer
method (page 43).
45