Active Probes - Agilent Technologies InfiniiVision 5000 Series User Manual

3
Connecting to the Device Under Test

Active Probes

74
Most Agilent active probes are compatible with the AutoProbe interface. Active probes
that do not have their own external power supply require substantial power from the
AutoProbe interface. "Quantity Supported" indicates the maximum number of each type
of active probe that can be connected to the oscilloscope. If too much current is drawn
from the AutoProbe interface, an error message will be displayed, indicating that you
must momentarily disconnect all probes to reset the AutoProbe interface, then connect
only the supported quantity of active probes.
A P
CTIVE ROBES

Active Probes

1130A 1.5 GHz InfiniiMax amplifier, requires one or more
InfiniiMax probe heads: E2675A, E2668A, E2669A
1131A InfiniiMax 3.5 GHz Probe
1132A InfiniiMax 5 GHz Probe
1134A InfiniiMax 7 GHz Probe
1141A Differential Probe, 200 MHz, with 1142A power
supply
1144A Active Probe, 800 MHz, with 1142A power supply
1145A 2-Channel, 750 MHz Active Probe, with 1142A
power supply
1147A 50 MHz/15A AC/DC Current Probe
1156A 1.5 GHz Active Probe
1157A 2.5 GHz Active Probe
1158A 4 GHz Active Probe
N2772A Differential Probe, 20 MHz, with N2773A power
supply
N2774A (obsolete, replaced by N2782A) with N2775A
power supply
N2782A 50 MHz/30Arms AC/DC Current Probe, with
N2779A power supply
Quantity Supported
2
2
2
2
4
4
2
2
4
4
4
4
4
4
InfiniiVision Oscilloscopes User's Guide