6
Measurements and Math Functions
204
The example below shows a delay measurement between the rising edge of channel 1
and the rising edge of channel 2.
Phase
Phase is the calculated phase shift from source 1 to source 2, expressed in degrees.
Negative phase shift values indicate that the rising edge of source 1 occurred after the
rising edge of source 2.
Delay
---------------------------------------- - X 360
Phase =
Source 1 Period
Source 1
Source 2
1 Press the Settings softkey to select the source 1 and source 2 channels for the phase
measurement.
The default Phase settings measure from channel 1 to channel 2.
Period
Delay
InfiniiVision Oscilloscopes User's Guide