Adjusting Harness Height - Britax Marathon User Manual

Harness Height Adjustment
Loosen the harness by lifting the harness
1
adjuster lever while pulling the shoulder
straps forward as far as possible (Fig. A) .
2 From the rear of the child restraint,
unhook the shoulder harness from the
yoke (Fig. B) .
3 Pull straps through the shell and cover,
to the front of the restraint .
Do not remove HUGS pads for
NOTE:
forward-facing use . Removal of HUGS is
optional for rear-facing use only .
4 Thread the harness straps through the
appropriate harness height slots (Fig. C) .
5 Reattach harness straps to the yoke
(Fig. B) .
6 Pull harness adjuster strap to tighten the
harness .
7 Verify that all straps are threaded at the
same height and are not twisted .

Adjusting Harness Height

A
B
C
31