Modem Module - HP 8510w Maintenance And Service Manual

Modem module

NOTE: The modem module spare part kit does not include a modem module cable. The modem
module cable is included in the Cable Kit, spare part number 452198-001. See
for more Cable Kit spare part number information.
Description
Modem module for use in all countries and regions except Australia and New Zealand
Modem module for use in Australia and New Zealand
Before removing the modem module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Optical drive (see
c.
Keyboard (see
d.
Switch cover (see
e.
TouchPad (see
f.
Display assembly (see
g.
Top cover (see
h.
Speaker assembly (see
Remove the modem module:
1. Remove the two Phillips PM2.5×4.0 screws (1) that secure the modem module to the system
board.
2. Disconnect the modem module (2) from the system board by lifting it straight up.
Battery on page 47).
Hard drive on page 51)
Optical drive on page
Keyboard on page 58)
Switch cover on page
TouchPad on page 70)
Display assembly on page
Top cover on page 84)
Speaker assembly on page
54)
75)
79)
87)
Component replacement procedures
Cable Kit on page 28
Spare part number
443899-001
443899-011
89