HP 8510w Maintenance And Service Manual page 101

Mobile workstation and notebook pc
Hide thumbs Also See for 8510w:
Table of Contents

Advertisement

Before removing the system board, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Hard drive (see
b.
Optical drive (see
c.
Keyboard (see
d.
Fan (see
Fan on page
e.
Heat sink (see
f.
Switch cover (see
g.
TouchPad (see
h.
Display assembly (see
i.
Top cover (see
j.
Speaker assembly (see
k.
Modem module (see
When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
SIM (see
SIM on page
Memory module (see
WLAN module (see
WWAN module (see
Processor (see
Processor on page
Graphics card (see
PC Card assembly (see
Battery on page
47).
Hard drive on page
51)
Optical drive on page
Keyboard on page
58)
63)
Heat sink on page
64)
Switch cover on page
TouchPad on page
70)
Display assembly on page
Top cover on page
84)
Speaker assembly on page
Modem module on page
48)
Memory module on page
WLAN module on page
WWAN module on page
67)
Graphics card on page
PC Card assembly on page
54)
75)
79)
87)
89)
56)
72)
61)
68)
95)
Component replacement procedures
91

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

8510pCompaq 8510pCompaq 8510w

Table of Contents