Display Assembly - HP 8510w Maintenance And Service Manual

Display assembly

Description
Display assemblies for use with computer models equipped with WLAN and WWAN capability (includes 3 WLAN antenna
transceivers and cables and 2 WWAN antenna transceivers and cables)
15.4-inch, WSXGA+
15.4-inch, WXGA
Display assemblies for use with computer models equipped with only WLAN capability (includes 3 WLAN antenna transceivers
and cables)
15.4-inch, WUXGA
15.4-inch, WSXGA+
15.4-inch, WXGA
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Disconnect the wireless antenna cables from the WLAN module (see
and the WWAN module (see
6.
Remove the following components:
a.
Keyboard (see
b.
Switch cover (see
Remove the display assembly:
1. Disconnect the display panel cable (1) from the system board.
Battery on page 47).
WWAN module on page
Keyboard on page 58)
Switch cover on page
WLAN module on page
61).
75)
Component replacement procedures
Spare part number
452211-001
452210-001
452209-001
452208-001
452207-001
72)
79