HP 8510w Maintenance And Service Manual page 95

Mobile workstation and notebook pc
Hide thumbs Also See for 8510w:
Table of Contents

Advertisement

3.
Remove the ten Torx T8M2.5×9.0 screws (2) that secure the top cover to the base enclosure.
4.
Turn the computer right-side up, with the front toward you.
5.
Disconnect the fingerprint reader board cable (1) from the system board.
6.
Remove the two Torx T8M2.5×7.0 screws (2) and the four Phillips PM2.5×3.0 screws (3) that
secure the top cover to the computer.
7.
Lift the rear edge of the top cover (1) and swing it up and forward until it rests at an angle.
8.
Disconnect the microphone cable (2) from the system board.
Component replacement procedures
85

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

8510pCompaq 8510pCompaq 8510w

Table of Contents