4.
Remove the battery (see
5.
Remove the following components:
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
k.
l.
Remove the PC Card assembly:
1.
Turn the system board upside down, with the front toward you.
2.
Remove the two Phillips PM2.0×3.0 screws that secure the PC Card assembly to the system board.
3.
Detach the slots on the PC Card assembly from the tabs on the PC Card connector (1).
96
Chapter 4 Removal and replacement procedures
Battery on page
Hard drive (see
Hard drive on page
Optical drive (see
Optical drive on page
Keyboard (see
Keyboard on page
Fan (see
Fan on page
63)
Heat sink (see
Heat sink on page
Switch cover (see
Switch cover on page
TouchPad (see
TouchPad on page
Display assembly (see
Display assembly on page
Top cover (see
Top cover on page
Speaker assembly (see
Modem module (see
Modem module on page
System board (see
System board and system board frame on page
47).
51)
54)
58)
64)
75)
70)
84)
Speaker assembly on page
89)
79)
87)
90)