Stowage Well (Under) - Mercedes-Benz M-Class Operator's Manual

Stowage areas
342
To install: insert one bracket ; into both
X
the left and the right loading rails and slide
it to the desired position (
Insert telescopic rod : into brackets ;
X
and, while doing so, press release
button ? and push the rod downwards
until it engages.
Make sure that locking button = on
X
brackets ; is pressed.
This keeps brackets ; in place on the
loading rail.
To remove: press release button ? on
X
respective bracket ; and remove
telescopic rod : by pulling it upwards and
out.
Stowage well under the cargo
compartment floor
G WARNING
If you drive when the cargo compartment floor
is open, objects could be flung around, thus
striking vehicle occupants. There is a risk of
injury, particularly in the event of sudden
braking or a sudden change in direction.
Always close the cargo compartment floor
before a journey.
A removable insert under the cargo
compartment floor contains the parts of the
EASY-PACK load-securing kit. The tire-
change tool kit is stored beneath this insert.
X
page 340).
Y
X
X
X
X
X
X
X
i
To open: holding the ribbing, press
handle : downwards ;.
Handle : folds up.
Swing the cargo compartment floor
upwards using handle : until it rests
against the cargo compartment cover.
Fold out hook = on the underside of the
cargo compartment floor in the direction of
the arrow.
Attach hook = to the cargo
compartment's upper seal ?.
To close: detach hook = from the cargo
compartment's upper seal ?.
Fasten hook = to the bracket on the
underside of the cargo compartment floor.
Fold the trunk floor down.
Press the cargo compartment floor
down ; until it engages.
To remove the cargo compartment floor,
undo the press studs below the cargo
compartment floor. When you re-install the