Number From The Phone Book; Redialing - Mercedes-Benz M-Class Operator's Manual

Establish a Bluetooth
X
COMAND; see the separate operating
instructions.
Press the = or ; button on the
X
steering wheel to select the
You will see one of the following display
messages in the multifunction display:
Phone READY or the name of the network
R
provider: the mobile phone has found a
network and is ready to receive.
Phone No Service: there is no network
R
available or the mobile phone is searching
for a network.
Accepting a call
Example: incoming call
If someone calls you when you are in the
Tel menu, a display message appears in the
multifunction display.
Press the 6 button on the steering
X
wheel to accept an incoming call.
You can accept a call even if you are not in
the Tel menu.
Rejecting or ending a call
Press the ~ button on the steering
X
wheel.
You can end or reject a call even if you are not
in the Tel menu.
Dialing a number from the phone book
Press the = or ; button on the
X
steering wheel to select the
Press the 9, : or a button to
X
switch to the phone book.
®
connection to
Tel menu.
Tel menu.
Menus and submenus
Press the 9 or : button to select the
X
desired name.
or
To begin rapid scrolling: press and hold
X
the 9 or : button for longer than
one second.
Rapid scrolling stops when you release the
button or reach the end of the list.
If only one telephone number is stored
X
for a name: press the 6 or a button
to start dialing.
or
If there is more than one number for a
X
particular name: press the 6 or a
button to display the numbers.
Press the 9 or : button to select the
X
number you want to dial.
Press the 6 or a button to start
X
dialing.
or
To exit the telephone book: press the
X
~ or % button.

Redialing

The on-board computer saves the last names
or numbers dialed in the redial memory.
Press the = or ; button on the
X
steering wheel to select the
Press the 6 button to switch to the
X
redial memory.
Press the 9 or : button to select the
X
desired name or number.
Press the 6 or a button to start
X
dialing.
or
To exit the redial memory: press the
X
~ or % button.
271
Tel menu.
Z