Deactivating/Activating - Mercedes-Benz M-Class Operator's Manual

Mercedes-benz m-class
Hide thumbs Also See for M-Class:
Table of Contents

Advertisement

the brake system requires this.
R
the temperature in the vehicle interior
R
deviates from the set range.
the system detects moisture on the
R
windshield when the air-conditioning
system is switched on.
the charge level of the battery is too low.
R
i
Shifting the transmission to position P
does not start the engine.
i
If you shift the transmission from R to D,
the ECO start/stop function is available
again once the ¤ symbol reappears in
green in the multifunction display.
Deactivating/activating the ECO start/
stop function
ECO button
To switch off (except AMG vehicles):
X
press button :.
Indicator lamp ; and the ¤ symbol in
the multifunction display go out.
To switch on (except AMG vehicles):
X
press button :.
Indicator lamp ; lights up. If all conditions
for automatic engine switch-off
(
page 162) are fulfilled, the ¤ symbol
Y
is shown in green in the multifunction
display.
If not all conditions for automatic engine
switch-off (
page 162) are fulfilled, the
Y
¤ symbol is shown in yellow in the
multifunction display. If this is the case, the
ECO start/stop function is not available.
To switch off (AMG vehicles): in program
X
C, press button :.
or
Switch to drive program S or M
X
(
page 169).
Y
Indicator lamp ; and the ¤ symbol in
the multifunction display go out.
The
Stop/Start active
inactive
message in the AMG menu in the
multifunction display goes out.
To switch on (AMG vehicles): press
X
button :.
Indicator lamp ; lights up. If drive
program S or M is active, the automatic
transmission switches to drive program C.
If all conditions for automatic engine
switch-off (
page 162) are fulfilled, the
Y
¤ symbol is shown in green in the
multifunction display. In addition, the
Stop/Start active
the AMG menu in the multifunction display.
If conditions for automatic engine switch-
off (
page 162) have not been fulfilled , the
Y
¤ symbol will be shown in yellow. If this
is the case, the ECO start/stop function is
not available. In addition, the
inactive
display message is shown in the
AMG menu in the multifunction display.
i
If indicator lamp ; is off, the ECO start/
stop function has been deactivated
manually or as the result of a malfunction.
The engine will then not be switched off
automatically when the vehicle stops.
Driving
or
Stop/Start
message is shown in
Stop/Start
Z
163

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents