Playing Back An Ipod - JVC UX-DM8 Instructions Manual

Micro component system
Table of Contents

Advertisement

Playing Back an iPod

Compatible iPod types
iPod nano 1GB/2GB/4GB
iPod nano (2nd Generation) 2GB/4GB/8GB
iPod mini 4GB/6GB
iPod (4th Generation) 20GB/40GB
iPod photo (4th Generation) 20GB/30GB/40GB/60GB
iPod video (5th Generation) 30GB/60GB/80GB
• iPod is a trademark of Apple Inc., registered in the U.S. and
other countries.
• If the iPod does not play correctly, update your iPod
software to the latest version. For details about updating
your iPod, check on the Apple web site
<http://www.apple.com>.
To connect an iPod
arrow mark
Stand for iPod (supplied)
Insert the plug into the iPod terminal on the System with the
arrow mark side down and align the arrow mark with 5
mark on the front panel.
INFO
5
mark
On the front panel
Connection cable
for iPod (supplied)
• Be sure to reduce the volume on the System to the
minimum level before connecting an iPod. Adjust the
volume after starting playback.
• DO NOT connect or disconnect the iPod when the System is
turned on.
• "iPod CONNECT" appears while iPod is connected.
• To disconnect the iPod safely, turn the System off before
disconnecting it.
• To disconnect the connection cable from the iPod, hold the
buttons on the sides of the plug then pull it out.
• You cannot send any data to your iPod from the System.
• Do not carry the System with iPod connected. You might
drop it or it might cause damages to the connector part.
• Do not touch or hit the iPod terminal pins or connector pins
directly. It might cause damages to the connector part.
• If incompatible iPod type is connected, the iPod may not be
operated from the System. To enable the operation, before
connecting the iPod, switch the charge mode to "OFF"
(refer to "To turn ON/OFF the charge mode" on page 11)
with "iPod" selected as source.
• Sound distortion may occur when playing back audio
sources with high recording levels. When distortion
occurs, it is recommended to turn off the equalizer of the
iPod. For information on operating the iPod, see the iPod
instruction manual.
To play back an iPod
• If you press iPod 6, the
To turn off the iPod
While "iPod" is selected as the source...
• Press and hold iPod 6 for 2
2
sec.
To select a track
While playing an iPod...
• First time you press 4, you
System detects the iPod and
starts playback.
seconds.
will go back to the beginning of
the current track.
10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ca-uxdm8Sp-uxdm8

Table of Contents