Time - Ubee DDW2600 User Manual

24
Apply
Refresh

6.2.6 Time

This page allows configuration and display of the system time obtained from network servers
via Simple Network Time Protocol. The system has to be reset for any changes to take effect.
Label
Enable SNTP
Current Time
System Start Time
Time Server 1
Time Server 2
Time Server 3
Time zone Offset
Hours
Minutes
DDW2600/DDC2700
Click to save.
Click to refresh the page.
Description
Click to enable SNTP feature.
Display the system time currently.
Display the accumulated time since system was started.
Define the Time server IP address or Domain name.
Define the Time server IP address or Domain name.
Define the Time server IP address or Domain name.
Define the time zone to. '8' means GMT + 08, '-1' means GMT
-01.
Define the minute offset.
Web User Interface