Advanced- Options - Ubee DDW2600 User Manual

25
Apply
Reset Values

6.2.7 Advanced- Options

Label
WAN Blocking
Ipsec PassThrough
PPTP PassThrough
Multicast Enable
UPnP Enable
DDW2600/DDC2700
Click to save.
Click to reset values to factory default value.
Description
Select to block connection request initialized from Internet
User.
If Internet user initialized IPSec VPN request to the host
located behind the router, NAT will make this attempt fail.
Enable Pass Through is to force the router to redirect the
IPSec request to local host.
If Internet user initialized PPTP VPN request to the host
located behind the router, NAT will make this attempt fail.
Enable Pass Through is to force the router to redirect the
PPTP request to local host.
Multicast optimizes the bandwidth utilization compared with
unicast. Especially, video stream application.
Select to activate UPnP. Be aware that anyone could use
an UPnP application to open the web UI login screen
without entering the router's IP address (although you must
still enter the password to access the web UI).
Web User Interface