Vpn- Configure - Ubee DDW2600 User Manual

43
PPTP server
Configure
IPSec Endpoint
#
Name
Status
Control
Configure
Add New Tunnel

6.4.3 VPN- Configure

Internet protocol Security (IPSec) is a standard based VPN that offers flexible solutions for
secure data communications across a public network like the Internet. IPSec is built around a
number of standardized cryptographic techniques to provide confidentiality, data integrity and
authentication at the IP layer.
A VPN tunnel is usually established in two phases. Each phase establishes a security
association (SA), a contract indicating what security parameters wireless router and the
remote IPSec router will use. The first phase establishes an Internet Key Exchange (IKE) SA
between wireless router and remote IPSec router. The second phase uses the IKE SA to
securely establish an IPSec SA through which the wireless router and remote IPSec router
can send data between computers on the local network and remote network.
Before IPSec VPN configuration, you will be involved with such terms like IPSec Algorithms,
Authentication Header and ESP protocol.
DDW2600/DDC2700
Wireless router integrated with L2TP/PPTP server inside,
select Enable or Disable.
Click Configure to make the L2TP/PPTP setting to take
effect.
Select to disable or enable IPSec VPN service.
ID of the IPSec VPN tunnel.
Identical name of IPSec VPN tunnel
Once an IPSec VPN is connected successfully, Status will
turn to be connected. Otherwise, it shows Not Connected.
User can manually trigger IPSec VPN connection request to
the remote VPN gateway.
Click Edit to modify IPSec VPN parameters of this tunnel;
Click Delete to delete this IPSec VPN tunnel.
Click to quickly create a new IPSec VPN tunnel, and then to
modify its parameters.
Web User Interface