Advanced- Pass Through - Ubee DDW2600 User Manual

32
Label
Trigger Range
Start Port
End Port
Target Range
Start Port
End Port
Protocol
Enable
Apply

6.2.13 Advanced- Pass Through

This page allows configuration of pass through table, the device in pass through table will be
treated as bridge device.
DDW2600/DDC2700
Description
The trigger port is a port (or a range of ports) that causes (or
triggers) the router to record the IP address of the LAN computer
that sent the traffic to a server on the WAN.
Type a port number or the starting port number in a range of port
numbers.
Type a port number or the ending port number in a range of port
numbers.
Target Range is a port (or a range of ports) that a server on the
WAN uses when it response to service requests. The router
forwards the traffic with this port (or range of ports) to the client
computer on the LAN that requested the service
Type a port number or the starting port number in a range of port
numbers.
Type a port number or the ending port number in a range of port
numbers.
Define the protocol type for this rule.
Click to active this rule.
Click to save.
Web User Interface