Page Allow/Deny [Feature]#O; Pause/Pause Insertion - Comdial DX-80 User Manual

using the Evening Mode code or a feature button programmed with the
code for simple one-button operation.
Operation – Change Service Mode
1. At the attendant extension:
1.1. Press the button programmed with the Service Mode feature
code.
Or enter the feature code...
1.2. Press [FEATURE]ye.
1.3. Input the attendant extension password.
2. The Service Mode is advanced to the next mode.
3. Repeat until the appropriate mode of service displays.
Page Allow/Deny
You can block one-way page announcements at your extension by dialing
the Page Deny code. The Page Allow/Deny feature does not affect enabled
Background Music.
Operation – Setup
1. When the extension is idle, press [FEATURE]#o.
2. Press [FEATURE]#o again to enable page announcements at
your extension.

Pause/Pause Insertion

Pause Insertion is used to generate an intentional delay in dialing on
outgoing outside line calls. You can store a pause or a combination of
pauses in the Speed Dial bins to allow timed access to special services
while allowing you to monitor the progress of the call.
A pause will appear as "P" on the display.
Operation
When storing numbers in speed dial, use the feature code
[FEATURE]#up to insert a pause.
Page 48
PSWD :_
PAGING DENY
PAGING ACCEPT
[FEATURE]#o
P7292 DETUG 03/01-1