Page Allow/Deny; Pause/Pause Insertion - Comdial DX-80TM User Manual

password). The attendant extension can set the system mode of operation
using the Evening Mode code or a feature button programmed with the
code for simple one-button operation.
Operation – Change Service Mode
1. At the attendant extension:
1.1. Press the button programmed with the Service Mode feature
code.
Or enter the feature code...
1.2. Press
1.3. Input the attendant extension password.
2. The Service Mode is advanced to the next mode.
3. Repeat until the appropriate mode of service displays.

Page Allow/Deny

You can block one-way page announcements at your extension by dialing
the Page Deny code. The Page Allow/Deny feature does not affect enabled
Background Music.
Operation – Setup
1. When the extension is idle, press
!/9
2. Press
extension.

Pause/Pause Insertion

Pause Insertion is used to generate an intentional delay in dialing on
outgoing outside line calls. You can store a pause or a combination of
pauses in the Speed Dial bins to allow timed access to special services
while allowing you to monitor the progress of the call.
A pause will appear as "P" on the display.
Operation
When storing numbers in speed dial, use the feature code
to insert a pause.
Page 48
!63
.
PSWD
PAGING DENY
again to enable page announcements at your
PAGING ACCEPT
:_
!/9
.
!/9
!70
P7292 DETUG 09/01