Speed Dial Extension Rup - Rio, System Tpp - Yoo - Comdial DX-80 User Manual

2. The dialed number is stored in the Saved Number memory.
Operation – SNR
1. When the telephone is idle, press the feature button designated as
REDIAL (if available) or press [FEATURE]tq.
2. The stored number is dialed.
Speed Dial
Speed Dialing allows you to store frequently dialed numbers. There are 20
speed "bins" for most extensions and 200 system speed bins that may be
shared by all extensions.
Operation – Setup
1. Press [FEATURE]q.
Dial the Speed Dial location number rup – rio).
2.
3. Press [show]. The current contents are displayed.
4. Press [chg].
5. Input the number you want to store, including Pauses
([FEATURE]up), Flash [FEATURE]e and Pulse To Tone
Conversion (*) codes.
6. Press [save]. That number is stored in this speed dial location.
7. Continue programming speed dial locations from step 2 above or
hang-up (press the ON/OFF button twice) to exit.
Operation – Use – System Selects the Outside Line Automatically
Dial the Speed Dial location number rup – rio,
1.
tpp – yoo).
2. That speed dial number is dialed on the last outside line that you used
or any outside line in the same outside line group.
Operation – Use – You Select the Outside Line to Use
1. Press the desired outside line button (or dial the outside line directory
number 740-755).
Dial the Speed Dial location number rup – rio,
2.
tpp – yoo).
Page 12
Extension rup – rio,
System tpp – yoo
P7292 DETUG 03/01-1