Call Park / Call Park Answer[Feature]Ue - Comdial DX-80 User Manual

3. If the extension you are calling is busy, the display shows:
4. Press [cbck]
5. You will hear a confirmation tone and the display will read
6. Your extension will return to idle status.
To Answer a Call Back:
1. When the Call Back begins (called extension is now available), your
extension will ring a special Call Back alert ring for 30 seconds and the
display shows:
1.1. Lift the handset or press the ON/OFF button
Or...
1.2. Press [reply] to activate the Call Back.
To cancel all active Call Backs prior to receiving Call Back Alert
ringing:
1. Press [FEATURE]##.
Call Park / Call Park Answer
This feature allows you to "park" a call at any extension. It is also used to
retrieve a parked call from any extension. You park and retrieve calls by
dialing the Call Park code ([FEATURE]ue) followed by the extension
number where the call is to be/has been parked.
Operation – Park Call
1. While connected to an outside line call, press [FEATURE]ue or
press the feature button designated as CALL PARK (if available).
2. Dial the extension number where this call is to be parked, or press the
DSS button of the extension where this call is to be parked.
3. The outside line call is parked at that extension.
4. Hang up the phone or proceed with other system functions.
Operation – Call Park Answer
1. While the phone is idle, press [FEATURE]ue or press the feature
button designated as CALL PARK (if available).
DX-80 Digital Executive Telephone User Guide
EXT XXX BUSY
cbck msg next
CBCK TO EXT XXX
CALL BACK TO XXX
reply del
[FEATURE]ue
Page 15