Table of Contents
Advertisement
Introduction
Low battery
automatic
hibernation
Heat dispersal
Hibernation
Standby
1-10
When battery power is exhausted to the point that
computer operation cannot be continued, the
system automatically enters Hibernation and
shuts down. You can specify the setting in the
Setup Action tab in TOSHIBA Power Saver.
To protect from overheating, the CPU has an
internal temperature sensor. If the computer's
internal temperature rises to a certain level, the
cooling fan is turned on or the processing speed
is lowered. Use the Fan item of the Basic Setup
tab in TOSHIBA Power Saver.
■
Maximum
Performance
■
Performance
■
Battery optimized
This feature lets you turn off the power without
exiting from your software. The contents of main
memory are saved to the hard disk, when you
turn on the power again, you can continue
working right where you left off. Refer to the
Turning off the power
Getting Started, for details.
If you have to interrupt your work, you can turn off
the power without exiting from your software.
Data is maintained in the computer's main
memory. When you turn on the power again, you
can continue working right where you left off.
Turns on fan first, then if
necessary lowers CPU
processing speed.
Uses a combination of
fan and lowering the
CPU processing speed.
Lowers the CPU
processing speed first,
then if necessary turns
on the fan.
section in Chapter 3,
User's Manual
Advertisement
Table of Contents
