Problem
Cannot write correctly
User's Manual
Procedure
Check the type of CD/DVD you are using. The
drive supports:
DVD-ROM:
DVD-ROM, DVD-Video
CD-ROM:
CD-DA, CD-Text, Photo CD
(single/multi-session), CD-
ROM Mode 1, Mode 2, CD-
ROM XA Mode 2 (Form1,
Form2), Enhanced CD (CD-
EXTRA), CD-G (Audio CD
only), Addressing Method 2
Check the region code on the DVD. It must
match that on the DVD-ROM&CD-R/RW drive.
Region codes are listed in the
drives
section in Chapter 2, The Grand Tour.
If you have trouble writing, make sure you are
observing the following precautions:
■
Use only media recommended by TOSHIBA.
■
Do not use the mouse or keyboard during writing.
■
Use only the software supplied with the computer
for recording.
■
Do not run or start other software during writing.
■
Do not jar the computer during writing.
■
Do not connect/disconnect external devices or
install/remove internal cards during writing.
If problems persist, contact your dealer.
Troubleshooting
Optical media
9-9