Installation Requirements; Tools And Parts; Location Requirements - Jenn-Air JDRP436WP02 Installation Instructions Manual

30" (76.2 cm), 36" (91.4 cm), 48" (121.9 cm) commercial style dual fuel convection ranges
Hide thumbs Also See for JDRP436WP02:
Table of Contents

Advertisement

Available languages

Available languages

Tip Over Hazard
A child or adult can tip the range and be killed.
Connect anti-tip bracket to wall behind range.
Reconnect the anti-tip bracket,
if the range is moved.
Failure to follow
these instructions can result
in death or serious burns to children and adults.
INSTALLATION REQUIREMENTS
Gather the required tools and parts before starting installation.
Read and follow the instructions
provided with any tools listed
here.
Tools needed
Tape measure
3/le" carbide tip masonry bit
#2 Phillips screwdriver
Marker or pencil
1/8"x 41¼ '' flat-blade
Pipe-joint compound
screwdriver
resistant to LP gas
Level
Noncorrosive leak-detection
Drill
solution
Wrench or pliers
Tubing cutter
Pipe wrench
For LP/Natural
Gas
Adjustable wrench or
Conversions
8/8"wrench
Adjustable wrench
3/8"drive ratchet
1/2"deep-well socket
1/8"drill bit
7 mm nut driver
18/le"combination
wrench
Masking tape
1/4",3/8", 8/W' nut drivers
Parts supplied
Check that all parts are included.
Anti-tip bracket kit
Burner bases and burner caps
Griddle drip tray (on griddle models)
LP orifice package (W10393255)
Conversion label (VV10393342)
NOTE: The cooktop is manufactured
for use with Natural gas.
To convert to LP gas, see the "Gas Conversions"
section.
Parts needed
Power supply cord kit:
30" (76.2 cm) and 36" (91.4 cm) models - A UL listed
40 amp power supply cord kit
48" (121.9 cm) models - A UL listed 50 amp power supply
cord kit marked for use with nominal 13/8 '' (34.93 mm)
diameter connection openings
A UL listed strain relief
UL listed wire connectors
All models must be installed with a backguard
if installing at zero
clearance to a combustible
backwall. See "Cabinet Dimensions"
in the "Location Requirements"
section for installation
requirements.
30" (76.2 cm) Adjustable Backguard
Order Part Number 8285148
36" (91.4 cm) Adjustable Backguard
Order Part Number 8284756
48" (121.9 cm) Adjustable Backguard
Order Part Number 8284755
9" (22.9 cm) Backguard for 30" (76.2 cm) Ranges
Order Part Number W10115773
9" (22.9 cm) Backguard for 36" (91.4 cm) Ranges
Order Part Number W10115776
9" (22.9 cm) Backguard for 48" (121.9 cm) Ranges
Order Part Number W10115777
22" (55.9 cm) Backsplash with Dual-Position
Shelf for
30" (76.2 cm) Ranges
Order Part Number W10285447
A. Anti-tip bracket
B. #8-18 x 1" Phillips head screws (4)
NOTE: Anti-tip bracket must be securely mounted to
subfloor. Thickness of flooring may require longer screws to
anchor bracket to subfloor. Longer screws are available from
your local hardware store. See "Install Anti-Tip Bracket"
section.
Gas pressure regulator
22" (55.9 cm) Backsplash with Dual-Position
Shelf for
36" (91.4 cm) Ranges
Order Part Number W10285448
22" (55.9 cm) Backsplash with Dual-Position
Shelf for
48" (121.9 cm) Ranges
Order Part Number W10285449
To order, see the "Assistance
or Service" section of the Use
and Care Guide.
Burner grates

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jdrp430wp01Jdrp548wp02Jdrp536wp02

Table of Contents