Define the display languages of the printer
Introduction
The Océ Express WebTools allows you to define the 'First language' (the default
display language) and the 'Second language' (the alternative display language) for
the printer operator panel.
The 'First language' and the 'Second language' you defined in the Océ Express
WebTools are also the display languages that are available on the printer operator
panel. You can toggle between these two languages using the operator panel.
Before you begin
Access the Océ Express WebTools. This setting can be edited by the key operator
and the system manager.
How to define the default and the alternative display languages in the
Express WebTools
Select 'Preferences' - 'System defaults' - 'Regional settings'.
1.
Click the value for 'First language',
2.
or
Click 'Edit' in the 'Regional settings' bar to access a window for all regional settings.
3.
Select the first display language that you can choose for the operator panel from the
4.
drop down list.
Click 'Ok' to confirm you entries or 'Cancel' to reject your entries.
5.
Repeat the same steps to define a second display language for the operator panel.
6.
Note: The Océ ColorWave
Define the display languages of the printer
™
600 supports 3 display languages.
Océ
103