Upload A Media Profile - Oce ColorWave 600 User Manual

Upload a media profile

Upload a media profile
When to do
When you have downloaded the zip file of a new or updated media profile from the
corporate web site you need to upload this media profile to the Océ ColorWave
embedded controller.
Before you begin
Extract the contents of the zip file to a folder. See the instruction file you
downloaded with the media profile.
This setting is editable for the System administrator or Power user.
How to install a new media profile
Click 'Support' - 'Media'.
1.
Click the 'Install' button in the toolbar above the media profiles list.
2.
Click Browse to navigate to the correct file on your workstation.
3.
Select the media profile and click Upload or 'Cancel'.
4.
Click the check box of the new media profile and click the 'Enable' button in the
5.
toolbar above the media profiles list to make the new media profile available on the
printer operator panel.
How to update an existing media profile
Click 'Support' - 'Media'.
1.
Click the check box of the media profile you want to update.
2.
Click the 'Update' button in the toolbar above the media profiles list.
3.
Click Browse to navigate to the correct file on your workstation.
4.
Select the media profile and click Upload or 'Cancel'.
5.
Click the check box of the updated media profile and click the 'Enable' button in the
6.
toolbar above the media profiles list to make the updated media profile available on
the printer operator panel.
Result
A warning message appears to inform you of the consequences for the print jobs.
The file is stored on the Océ ColorWave
visible in the media profile list on the 'Media' tab.
Note: If an older version of the file was active on the controller, this file will be
overwritten by the new file.
194 Chapter 6 Manage media on the Océ ColorWave
™
600 embedded controller. The new file is
™
600 printing system
™
600