Use LPR to send a print job to the Océ ColorWave
Use LPR to send a print job to the Océ ColorWave
Introduction
The Océ ColorWave
If you send your print job through LPR the default Océ Express WebTools settings
are leading.
How to send a print job via LPR
Type the following line command after the DOS prompt: lpr -S <hostname or IP
address> -P <print queue name> <file name>.
Note: You can use any name for <print queue name>, for example jobs.
180
Chapter 5 Use the printing system
™
600
™
600 supports printing through LPR.
™
600