Needle Threader - Husqvarna Viking Mega Quilter User Manual

Needle threader

To make threading the needle easier and
quicker you have been provided with a
needle threader.
1. Lower the presser foot. Press the
Needle Up/Down button twice to raise
the needle to its highest position.
Switch off the main switch and
unplug the machine.
2. Move the needle threader completely
downwards and turn it towards the
needle so that the small hook goes
through the needle eye from the right.
3. Pull the thread from behind around the
guide (A) and under the hook (B).
4. Hold the end of the thread with your
hand while pulling up the thread lightly.
5. Turn the knob (see picture). This will
draw a thread loop through the needle.
Release the threader knob slowly and
then pull the thread loop to the right.
Note: When using the threads below the
needle threader may not work.
Needle size
9/65
11/75
14/90
16/100
Operating your MEGA QUILTER™
Thread size
12, 20, 30, 40, 50, 60
12, 20, 30
12, 16, 20, 30
12, 20, 30
B
21
A