Getting Started To Sew - Husqvarna Viking Mega Quilter User Manual

Getting started to sew

Before you start to sew, try test stitching
with the same thread and with the same type
of fabric.
1. Raise the presser foot and place the
fabric under the foot.
2. Lower the presser foot and pull the
threads towards the back.
3. Set the speed control slide to slow until
you get used to the speed. Press down
on the foot control.
4. Gently guide the fabric along the seam
guide letting the fabric feed by itself.
5. Check the sewing result and adjust the
needle thread tension if needed.
Note: To lock the beginning of the seam, sew a
few stitches forward, then sew a few stitches in
reverse, then sew forward again. You can also pull
the bobbin thread to bring the needle thread to the
wrong side of the fabric. Tie the threads together.
Trim the remaining threads.
Getting started Getting started
26