Inserting A Bobbin Case Into The Hook; To Remove Bobbin Case And Bobbin - Husqvarna Viking Mega Quilter User Manual

Inserting a bobbin case into
the hook
Switch off the main switch and
unplug the machine.
1. Lift the hook cover plate (A) up and
remove it. Open the bobbin case cover
(B).
2. Holding the latch on the bobbin case
(see picture), position the bobbin case
into the hook aligning the slot with the
rib. The bobbin case should lock into
place when the latch is released.
3. Close the bobbin case cover and the
hook cover plate.
To remove bobbin case and
bobbin
Switch off the main switch and
unplug the machine.
1. Raise the needle and presser foot. Lift
the hook cover plate (A) up and remove
it. Open the bobbin case cover (B).
2. Take the bobbin case out of the hook by
pulling the latch and taking the bobbin
case straight out of the hook.
3. To remove the bobbin, release the latch,
and the bobbin will be released from the
bobbin case.
Operating your MEGA QUILTER™
18
A
B
A
B