Electrical Connection; Connecting The Foot Control - Husqvarna Viking Mega Quilter User Manual

Electrical connection

Before connecting to the power supply, make
sure the voltage shown on the machine conforms to
your electrical power. Always turn the power off
and unplug the sewing machine from the electrical
outlet when the machine is not in use.
Connect the power cord between the socket
of the MEGA QUILTER™ (A) and the
wall outlet.
For the USA and Canada:
This sewing machine has a polarized
plug (one blade wider than the other). To
reduce the risk of electric shock, this plug
is intended to fit in a polarized outlet only
one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install
the proper outlet.
DO NOT modify the plug in any way!

Connecting the foot control

Switch off the main switch.
Connect the plug of the foot control (B)
to the connection socket of the MEGA
QUILTER™.
Turn on the power switch (C).
Operating your MEGA QUILTER™
9
A
B
C