Bobbin Winding Button; Thread Cutter; Needle Up/Down - Husqvarna Viking Mega Quilter User Manual

Operating your MEGA QUILTER™

Bobbin winding button

Press the bobbin winding button on your MEGA
QUILTER™ to wind the bobbin. The light above
the button will light up while you are winding
the bobbin. When the bobbin is full, the MEGA
QUILTER™ will automatically stop and the
bobbin light will be turned off. Alternatively, press
the button again to stop bobbin winding.
Note: With your MEGA QUILTER™ you can wind
the bobbin while sewing.

Thread Cutter

The thread cutter button trims the top and bobbin
thread.
After trimming the threads you can continue
sewing without having to pull the bobbin thread to
the top.
Note: If you are using a thread thicker than
30 wt, use the thread cutter on the side. You cannot use
the foot control or the Needle Up/Down while you are
trimming the threads.

Needle Up/Down

The Needle Up/Down function is useful when
you are turning a corner on your quilt. Press the
Needle Up/Down button to bring the needle bar
up or down. When the needle is down the red
indicator above the button will light up. When the
needle is up the green indicator will light up.
Your MEGA QUILTER™ will stop with the
needle up or down depending on which light is
switched on. After using the Thread Cutter your
MEGA QUILTER™ will always stop with the
needle in the up position.
11