Activating Or De-Activating Functions - Accu-Chek Mobile User Manual

Getting to know your meter and lancing device

Activating or de-activating functions

Some functions, e.g. the beep tones and flagging
results can only be activated or de-activate.
38
Y Y You can recognise these functions by the fact that
there is either a tick or a checkbox
them and the command above the
or On (if there is a different command this means that n
the function can also be modified).
A tick means that the function is activated. The
command for the button is Off to allow you to
de-activate the function.
Press the button (Off) to de
vated function.
A checkbox means that the function is de -activated.
The command for the
to activate the function.
Press the button (On) to activate a de
function.
in front of
button is Off
f
) -activate the acti-
button is On to allow you n
) -activated