Transferring results for further analysis
5–20 cm
1 Please read the instructions for use supplied with
the software or hardware you are using. These will
include instructions on how to transfer data.
2 Make the receiving end (software product or hard-
ware) ready to transfer the results.
3 Position the meter 5–20 cm away from the infra-
red window of the receiving end. Point the two
infrared windows toward one another.
4 In the Transfer data menu: use
a
For analysis.
5 Press
(Select) to start transferring the re
)
sults.
Using the meter as a diary
to select
-
149