1
Getting to know your meter and lancing device
Activating or deactivating functions
Some functions, e.g. the beeper and flagging results
can only be activated or deactivated.
38
you can recognize these functions by the fact that
there is either a checkmark
front of them and the command above the
ton is Off or On (if there is a different command this
means that the function can also be modified).
A checkmark
means that the function is activated.
The command for the
to deactivate the function.
Press the
button (Off) to deactivate the activated
function.
A checkbox
means that the function is deactivated.
The command for the
to activate the function.
Press the
button (On) to activate a deactivated
function.
or a checkbox
in
but-
button is Off to allow you
button is On to allow you