Analyzing Test Results On A Pc - Accu-Chek Active GB User Manual

6

Analyzing Test Results on a PC

The meter has a built-in USB port for
transferring stored test results to a
computer (PC) that is equipped accordingly.
Roche offers a variety of special diabetes
management hardware and software which
enhance the integrated diary functions of
your meter. With these diabetes
management hardware and software, you
and your healthcare professional can
manage your test results more effectively
and use graphs and tables to understand
them better. For more information on
diabetes management software, contact
customer support.
1
1
2
2
3
3
The USB port is
1
located on the left
side of the meter.
To connect the meter
to the computer, you
need a USB cable
that is not longer
than 1.5 m. =
2
small end (micro B
connector) =
3
large end (USB
A connector).
Plug the small end
into the USB port on
the meter.
Plug the large end
into a USB port on
your computer.
4
diabetes management software on your
computer.
While the connection is being established,
flashes on the meter display.
5
6
7
17
If the meter is off, it
turns on.
Read the instructions
for use of the
diabetes
management
software in use.
If necessary, start the
The meter transfers
all stored test results.
During the data
transfer, does not
flash.
The test results
remain in the meter
memory after being
transferred.
To turn the meter off,
unplug the small end
of the USB cable
from the meter once
the data transfer is
complete.
For approx.
3 seconds, is
displayed.
The meter turns off.