Ricoh 3245 - Type Print Server Scanner Reference page 111

❒ When [Off] is selected and [Auto
Detect] is selected for scan size, if
originals of different sizes are
placed in the ADF, the maxi-
mum size will be detected as the
scan size.
❖ ❖ ❖ ❖ Original Orientation Priority
Select the default for original
placement orientation. When orig-
inals are always positioned the
same way, select that orientation
as the default to make operation
easier.
Reference
p.76 "Making the Settings Relat-
ed to the Orientation of the
Original and Scanned Sides"
❖ ❖ ❖ ❖ Change Initial Mode
Select [Standard] to use the stand-
ard settings as the initial mode
which is the mode of the machine
immediately after the operation
switch is turned on or modes are
cleared or reset.
Select [Program No.10] to use the set-
tings stored in Program No.10 as
the initial mode.
❖ ❖ ❖ ❖ Background Density of ADS (Full Colour)
With this setting, you can process
scanned images to erase unwanted
paper features (such as lines on
rough paper).
❖ ❖ ❖ ❖ A.C.S. Sensitivity Level
Set the sensitivity level for detect-
ing colours/black and white to
scan the original when [Scan Type]
is set to [Auto Colour Select].
Selecting a custom size
When selecting [Custom Size] as the
scan size, follow the procedure be-
low.
A A A A
Press [Custom Size] on the Scan
Size Setting screen.
B B B B
Enter the original size with the
number keys.
Select and enter values for [X1] and
[Y1], and then press the { { { { #} } } } key.
C C C C
Enter the scan starting point in re-
lation to the standard scan start-
ing point.
Select and enter values for [X2] and
[Y2], and then press the { { { { #} } } } key.
Settings
9
103