Kodak 210433-1 User Manual page 41

To set margins
1 Press Setup/Paper Option/Margins.
2 Choose Normal or Expanded.
3 Press OK.
Auto-Load Delay
Auto-Load delay lets you set the time between when the printer senses the media
and when printing starts. This lets you manually reposition the media if necessary.
The default is 6 seconds, selectable from a range of 1-12 seconds.
To set auto-load delay
1 Press Setup/Paper Option/Auto-Load Delay.
2 Choose the delay time.
3 Press OK.
Auto-Cut
When the Auto-Cut option is set to on (off is the default), the printer automatically
cuts the media when the image is complete. Be sure the image is dry before
cutting, turn on the dryer and/or specify a Dry Time. See "Setting a Dry Time" in
this chapter for the procedure. You can select Cut from the control panel at any
time to cut the media.
Note: Automatic cutting is disabled when the paper feed option is
set to TAKEUP.
To set auto-cut
1 Press Setup/Paper Option/Auto-Cut.
2 Choose On or Off.
3 Press OK.
1500 TX User's Guide
Printer Options 3-7