Cisco Small Business WAP551 Administration Manual page 105

Wireless
WPS Process
NOTE
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
• WPS Configuration State—Whether the VAP will be configured from the
external registrar as a part of the WPS process.
• Transaction Status—The status of the last WPS transaction. The possible
values are None, Success, WPS Message Error, and Timed Out.
• WPS Operational Status—The status of the current or most recent WPS
transaction. The possible values are Disabled, Ready, Configuring, Proxying,
and Adding Enrollee. When no WPS transactions have occurred since WPS
was enabled, Ready appears.
• AP Lockdown Status—Whether the instance is currently in lockdown state.
• Failed Attempts with Invalid PIN—The number of times an attempt at
authenticating an external registrar has failed due to an invalid password.
This information appears for WPS instance:
• WPS Radio (WAP561 only)
• WPS VAP
• SSID
• Security
• Shared Key
If the WPS Configuration State field on the WPS Setup page is set to
Unconfigured, then the SSID and Security values are configured by the external
registrar. If the field is set to Configured, then these values are configured by the
administrator.
You can click Refresh to update the page with the most recent status information.
5
104