Chapter 7: Client Quality Of Service; Client Qos Global Settings; Acl - Cisco Small Business WAP551 Administration Manual

Client Quality of Service

Client QoS Global Settings

ACL

Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
This chapter provides an overview of Client quality of service (QoS) and explains
the QoS features available from the Client QoS menu. It contains these topics:
• Client QoS Global Settings
• ACL
• Class Map
• Policy Map
• Client QoS Association
• Client QoS Status
You can use the Client QoS Global Settings page to enable or disable quality of
service functionality on the WAP device.
If you disable Client QoS Mode, all ACLs, rate limiting, and DiffServ configurations
are globally disabled.
If you enable this mode, you can also enable or disable Client QoS mode on
particular VAPs. See the Client QoS Mode setting on the Client QoS Association
page.
ACLs are a collection of permit and deny conditions, called rules, that provide
security by blocking unauthorized users and allowing authorized users to access
specific resources. ACLs can block any unwarranted attempts to reach network
resources.
7
111