Transferring To And From Other Seats - Invacare Solara Spree GT Owner's Operator And Maintenance Manual

SECTION 2—SAFETY/HANDLING OF WHEELCHAIRS

Transferring To and From Other Seats

WARNING
BEFORE attempting to transfer in or out of the wheelchair, every precaution should
be taken to reduce the gap distance. Align both casters parallel with the object you
are transferring onto. Also be certain the wheel locks are engaged to help prevent
the wheels from moving.
CAUTION
When transferring, position yourself as far back as possible in the seat. This will
prevent damaged upholstery and the possibility of the wheelchair tipping forward.
NOTE: For this procedure, refer to FIGURE 2.6.
NOTE: This activity may be performed independently provided you have adequate mobility and
upper body strength.
1. Position the wheelchair as close as possible along side the seat to which you are
transferring, with the front casters parallel to it.
2. Engage wheel locks.
3. Remove or flip back armrests.
4. Shift body weight into seat with transfer.
NOTE: During independent transfer, little or no seat platform will be beneath you. Use a transfer
board if at all possible.
Maximum Gap Distance
FIGURE 2.6 Transferring To and From Other Seats
® ™ 26
Solara /Spree GT Part No 1125027