Table of Contents
Advertisement
To rep osition: Slide driver and passenger
seats slig htly forw ard. Press the ba ckrest
down firmly (A), unlock it (B), and place it
upright.
Before repositioning the rear seat ba ckrest,
mak e sure that the red mark ing on the slid e
catch on top of the backrest is visible; see
page 70, Fig ure 13455 V.
When repositioning rear sea t bac krest, pull
seat belt forwa rd so that it is not trapped.
When repositioning, lock the rear seat
backrests audibly into plac e on both sides
by pressing the slide catch on top of the
backrest in the direction of the a rrow. The
catch slides b ack to its centre position and
the red marking is no longer v isible.
Fold pa ssenger sea t 3
Remove the head restraint; see page 64.
Tilt passenger seat back rest forwa rd by
lifting the release lever.
To mov e to upright position, engage
bac krest audibly in p osition.
Not es on load ing
see page 74.
Lashing eyes
Lashing eyes make it possible to secure
cargo in the luggage compartment using
lashing straps 3 or a luggage net 3 . The
luggage net can be adapted to secure
small items of cargo: fold over the ends of
the net, guide the hooks through the mesh
and a tta ch the hooks to the eyes; see
pag e 69, Figure 7344 V.
71
Advertisement
Table of Contents
