Main Beam - Vauxhall Omega Owner's Manual

4. Detach plug connector from bulb base.
5. Press spring clip out of retaining lugs
and swivel out.
6. Rem ov e b ulb from reflector housing.
7. When installing new bulb, engage
fixing lug s of bulb hold er in recesses on
reflec tor, without touching the glass.
8. Swivel spring clip back into place and
engage in reta ining lugs.
9. Atta ch connector to bulb.
10. Place the headlamp cap in position and
close.
11. Refit the headlam p protective cover
and secure with rotating lock .

Main beam

1. O pen bonnet.
2. Remove the head la mp protectiv e cover;
see page 188, Figure 7490 V.
3. Remove the hea dlamp c ap; see
page 188, Figure 7253 V.
4. Push bulb on plug connector downwards
and remove from reflector housing.
5. Detach plug connector from bulb base.
6. Fit connector onto new bulb, without
touching the glass.
7. Insert bulb with connector so that lug on
bulb sock et engages in recess in
reflector.
8. Pla ce the headlam p cap in position and
close.
9. Refit the headlam p protective c ov er and
secure with rotating lock.
189