Table of Contents
Advertisement
Mount safety seat in direc tion of travel only
and lock both latch plates on securing
console audibly into belt buckles on
adap ter. Tug on the seat to check that the
belt has engaged properly .
110
Fastening t he chi ld's seat b el t
Plac e child in safety seat.
Insert latch plate of vehicle seat belt in
buckle.
The lap b elt of the vehicle seat belt must
pass through the two guides on the seat
cushion.
Ad just the upp er anchorage point of the
vehicle sea t belt so that the b elt runs along
the shortest route to the height adjuster on
the child safety seat. Height adjustm ent,
see p age 82.
O pen flap on outer height adjuster on
safety seat, insert belt and close flap.
Withdraw pin and a djust belt position by
mov ing slide upwa rds or downwards. Allow
pin to lock into p osition.
The seat b elt must pass over the child's
shoulder, never over the neck or upper
arm.
Remov ing the safety seat
Depress the red pushbutton for each
buckle on the a dapter. Detach the sa fety
seat from the adap ter; see pag e 105,
Fig. 10397 A.
Before rem oving the ad apter, disengage
the belt b uck les from underneath.
Advertisement
Table of Contents
