Anti-Theft Lock Ing System; Electrical Socket - Vauxhall Omega Owner's Manual

Insert front end of coupling ball bar into
coupling housing (1) and swivel rear end
upwards (2) until coupling ball b ar
enga ges audibly in coupling housing.
Loc king button on left-hand side of
coupling ball ba r must p roject visibly
once coupling b all bar has engag ed
(Fig. 7461 V).
If the loc king button is not projecting
visibly, repeat the procedure.
Towing is not permitted if the locking
button is not projecting visibly. If the
coupling b all bar cannot be attached
correctly, c onsult a workshop . We
recommend your Vauxhall Authorised
Repairer.

Anti-theft lock ing system

Open protectiv e flap in knob on right-ha nd
side of coupling ball bar. Turn k ey in loc k.
Remove key and press protective flap into
position.
Electri cal sock et
On S aloon, fold socket downwards – see
Fig. 10270 V.
Eye for b reak-aw ay st opping c able
In the case of carava ns/trailers with brake,
attach break away stopping ca ble to eye.
Saloon
Eye to left of coupling housing (small arrow
in Fig. 7461 V).
Estate
Eye to right of coupling housing.
Dismounti ng the coupling b all b ar
Release the anti-theft device: Op en
protec tiv e flap. Unlock and remove key.
Turn the knob on the right-hand side of the
coupling ball b ar clockwise w hile pressing
the locking button on left-hand sid e. Lower
the rear end of the coupling ball bar and
remove the coupling housing; see Figure
7462 V.
169