Storing Settings; Retrieving Settings; Overload - Vauxhall Omega Owner's Manual

Position memory 3 for electr ically
adj ust able driv er's seat and mi rrors 3
Three different seat and mirror setup s ca n
be stored (e. g. for three drivers).
Ready for operation:
z With driver's d oor open or ignition
switched on.
z For approx. 30 seconds after the driver's
door has been c losed or the ignition
switched off. Op erational readiness is
prolonged if system is operated within
these 30 second s.

Storing settings:

1. Adjust seat.
2. Adjusting interior m irror, see pa ge 8.
3. Adjusting exterior m irrors, see page 8.
4. Press memory button M and p osition
button 1 simultaneously.
5. Set position buttons 2 and 3 in the sam e
way .
Retriev ing settings:
Press and hold down position button 1, 2
or 3 until the stored seat and mirror
positions 3 are set.
For reasons of safety, a djustment stops
immed iately if the position button is
relea sed or one of the setting buttons is
op erated.
O verload
If the sy stem is electrica lly overloaded, the
power supply is autom atically cut off for a
short tim e.
Fault
If the electric drive fails, adjust seats
ma nually.
Adjust in longitudinal direction using crank
handle inc luded in vehicle tools – see
pag es 179, 180. Insert crank handle as
show n in illustration a nd turn.
The sy stem is protected by a fuse in the
fuse box – see page 184.
67