Fdc Ñ Fdc Connector; At Pw Ñ Power Supply Connectors; Atx Pw Ñ Atx Power Supply Connectors; J19 Ð Hardware Reset Control - SOYO Pentium 82430 TX P54C User's Manual & Technical Reference

15
Hardware Setup
FDC — FDC Connector
Attach floppy cable to this connector.
AT PW — Power Supply Connectors
The mainboard requires a power supply with at least 200 watts and a
Òpower goodÓ signal. AT PW has two 6-pin male header connectors.
Plug the dual connectors from the power directly onto the board
connector while making sure the black leads are in the center.
ATX PW — ATX Power Supply Connectors
The motherboard provides an ATX power supply connector. It is a
twenty-pin male header connector. Plug the connector from the power
directly onto the board connector while making sure the pin1 is in its
position.
11 20
J19 – Hardware Reset Control
Attach the Reset switch to J19. Closing the Reset switch restarts the
system.