Table of Contents
Advertisement
24
Chipset Features Setup
The Chipset Features Setup option changes the values of the chipset
registers. These registers control system options in the computer.
Note:
Change these settings only if you are familiar with the Chipset.
Run the Chipset Features Setup as follows.
1. Choose ÒCHIPSET FEATURES SETUPÓ from the Main Menu and
the following screen appears. (The screen below shows default
settings.)
Auto Configuration
DRAM Timing
DRAM Leadoff Timing
DRAM Read Burst (EDO/FP)
DRAM Write Burts Timing
Fast EDO Lead Off
Refresh RAS# Assertion
Fast RAS To CAS Delay
DRAM Page Idle Timer
DRAM Enhanced Paging
Fast MA to RAS# Delay
SDRAM (CAS Lat/RAS-to-CAS): 3/3
SDRAM Speculative Read
System BIOS Cacheable
Video BIOS Cacheable
8 Bit I/O Recovery Time
16 Bit I/O Recovery Time
Memory Hole At 15M-16M
2. Use the arrow keys to move between items and select values.
Modify selected fields using the PgUp/PgDn/+/Ð keys.
A short description of screen items follows:
Auto Configuration
DRAM Timing
DRAM Leadoff Timing
ROM PCI/ISA BIOS
CHIPSET FEATURES SETUP
AWARD SOFTWARE, INC.
: Enabled
: 60 ns
: 10/6/3
: x222/x333
: x222
: Disabled
: 4 CLKS
: 3
: 2 Clks
: Enabled
: 2 Clks
: Disabled
: Disabled
ESC : Quit
: Disabled
F1
: Help
: 3
F5
: Old Values (Shift)F2 : Color
: 3
F6
: Load BIOS Defaults
: Disabled
F7
: Load Setup Defaults
Enable this option (strongly
recommended) and the system
automatically sets all options on the left
side of the screen (except cache update
mode & BIOS cacheable).
If this option is Enabled you must boot
from Turbo mode.
Use the default setting.
Use the default setting.
BIOS Setup
: Select Item
PU/PD/+/– : Modify
Advertisement
Table of Contents
