Com1/Com2 Connectors; Ide Led Ð Ide Hdd Led Connectors; Fdc Connector; Prt Ð Parallel Port Connector - SOYO 6KB User's Manual & Technical Reference

10
Hardware Setup

COM1/COM2 Connectors

Connect COM1/COM2 devices to these connectors.
IDE LED – IDE HDD LED Connectors
Attach on-board IDE device LEDs to this connector. The LED lights
when an IDE device is active.

FDC Connector

Attach floppy cable to this connector.
PRT – Parallel Port Connector
Attach parallel port cable to this connector.
USB1/USB2 – Universal Serial Bus Connector
Attach USB cable to these connectors for external USB device.
PWRBT – ATX Power Supply On/Off Switch Connector

(Momentary Type)

Attach a two-pin switch to this connector for turning the ATX power
supply on/off.