Audio Technica 200 Series Installation And Operation Manual

Audio Technica 200 Series Installation And Operation Manual

Professional vhf wireless systems
Hide thumbs Also See for 200 Series:

Advertisement

200 Series Professional
VHF Wireless Systems

Advertisement

Table of Contents
loading

Summary of Contents for Audio Technica 200 Series

  • Page 1 200 Series Professional VHF Wireless Systems...
  • Page 2 Professional VHF Wireless Systems any medical-device disruption will cease when the RF transmitting source is turned off...
  • Page 4 Make certain the transmitter power switch is Off before installing or changing batteries. observe correct polarity as marked inside the battery compartment. do not force the battery in. Do not attempt to remove, replace or change the length of the transmitting antenna. Do not attempt to pull the lower body farther down, or to gain access to the electronics.
  • Page 5 The small trimmer controls are delicate; use only the supplied screwdriver. Do not force the trimmers beyond their normal 190 range of rotation. Return the screwdriver to its storage clip when not in use. minimum...
  • Page 9 Microphone Guitar Trimmer Trimmer (MT) (GT) © © Battery-Save Switch Battery Polarity (under screwdriver clip) Diagram Battery Polarity Diagram Battery-Save Switch Gain Trimmer Screwdriver Battery Condition Indicator Power Switch Battery Condition Off/Standby/On Indicator Input Antenna Connector Power Switch On/Standby/Off...

Table of Contents